5050 flexible rgb apa102 led strip 60leds

ITEM Number:  LC-APA102C

Product Description:

Dimensions: 5mm x 5mm x 1.6mm

Voltage: 5.0V 
Current 20ma per color, 60mA total at full brigtness
Viewing angle: 120 degree.

APA102 for the three-color RGB LED dimming control string Then IC, using the CMOS process,

providing three-color RGB LED output driver to adjust the pouput with 256 gray-scale and

32 brightness adjustment APA102 with two-output way,the CLK signal by synchronizatioAPA102 LED CHIP n,

so that the crystal cascadePiece of output movements synchronized.

Features

CMOS process, low coltage, low power consumption
Synchronous of two-lane
Choose postive output or negative output RGB tri-color LED out, 8 Bit(256level) color Set, 5Bit (32 level) brightness adjustment
Built-20mA constant current output
With self-detection signal
Built-in support for continuous oscillation PWM output can be maintained Static Screen

Main Parameter
◆ Working Voltage: DC5V
◆ LED Type: SMD5050 RGB
◆ Power Consumption: Max 18W/Meter
◆ Grey scale: 256
◆ Image: 60
◆ IP Grade: IP65/IP67

LED Qty: 60eds/M
IC Qty:60pcs/M
IC Type:  LC  APA60
Emitting Color: RGB
Controller:TS-1000C
Size: 5000mm*10mm*4mm

Can meet any customized modes! For example:
◆ Running mode
Green Running, Blue Running, Red Running, Cyan Running, White Running, Purple Running, Yellow Running
◆ Static mode
Static Green, Static Blue, Static Red, Static Cyan, Static White, Static purple,  Static Yellow
◆ Chasing mode
Green chase to left, Green chase to right, Blue chase to left, Blue chase to  right, Red chase to left, Red chase to right
Cyan chase to left, Cyan chase to right, White chase to left, White chase to  right, Purple chase to left, Purple chase to right,
Yellow chase to left, Yellow chase to right.
◆ Gradual change mode
Green Gradual Changing , Blue Gradual Changing , Red Gradual Changing , Cyan Gradual Changing , White Gradual Changing,
Purple Gradual Changing , Yellow Gradual Changing.
60 leds apa102 led strip
Application
◆ Path&contour marking
◆ legend back lighting
◆ Illuminate sign
◆ Mood and special light
◆ Channel letter lighting

Notice

◆  Make sure the connection is correct according to the diagram.

◆ DO NOT run over the peak value.

◆ Keep the surface of installation place clear and smooth, avoiding the strip fall off. DO NOT press the LED.

◆ DO NOT attempt to make sharp bends with the strip.

◆ DO NOT install where water or high humidity  may be present without further protection.

◆ 3M tape used only for indoor, when the strip installed outdoor, please use fixed slot.

◆ Away from strong acid or strong alkali